[1]Remember that you must use special keystrokes to access the VM/CMS terminal keys. x(PF1)-x(PF10) uses x(ESC) then the appropriate number on the number keys (NOT THE KEYPAD). For example: x(PF5) uses x(ESC) then x(5). DO NOT PRESS THE KEYS AT THE SAME TIME! x(PF11) uses x(ESC) then x(-) and x(PF12) uses x(ESC) then x(=). Refer to "Introduction to VM/CMS" in the "Systems" division for a complete description of all keycodes.